Showing
26 - 50 of 194 Records
Apsaras Hand Jewel, 3D model
- Title Translation: 飞天手饰 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Bodhisattva Standing Guanyin, 3D model
- Title Translation: 观世音菩萨 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Statue of a standing bodhisattva made of dark stone, brown and stained with age, with traces of red, green and blue pigment. The bodhisattva has a long face, plump cheeks, eyes nearly closed, with very long lobed ears, unpierced. There is a jeweled tiara with small a aureole in front on which is carved a tiny standing figure of Amida Buddha. There are streamers from the headdress with elaborately draped scarfs and jewels hanging down over the skirt. The statue is bare foot with no pedestal but does have a tang that comes out the bottom of the piece. C113, C150 and C151 are a set and come from Cave #2 of the Southern Xiangtangshan cave complex.
550 - 577
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Stone head of bodhisattva. Hard dark stone. Life size. Narrow oval face with half-closed eyes and tiny mouth; no urna; long ears with pierced lobes and earrings; three peaked headdress with tassels partly missing.
550 - 577
Buddha Head, 3D model
- Title Translation: 佛头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Stone head of Buddha. Stone with traces of pigment. The long earlobes of the Buddha are a reminder of the heavy earrings that he wore before renouncing material things to seek enlightenment. His rounded cheeks are meant to resemble those of a lion, an animal that is praised for its power and associated with Sakyamuni, the historical Buddha. The ushnisha, or cranial protuberance which may have originally been based on a topknot or turban, is considered a mark of wisdom. The urna, or marking on the forehead, is an all seeing eye. Finally the wavy hair of the Buddha suggests Greco Roman influence a departure from the conventional curls typical of Chinese sculptures at the time.
550 - 577
Disciple Hands, 3D model
- Title Translation: 弟子手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Pratyekabuddha Standing, 3D model
- Title Translation: 辟支(缘觉)佛立像 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Sui, 581-518 C.E.
- Project: Xiangtangshan Caves
- Work Description: Standing Guanyin Bodhisattva, head and both hands broken off. The smoothly falling robe forms thin ornamental folds.
550 - 577
Heavenly Buddhist Gathering, 3D model
- Title Translation: 天道会 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Disciple Relief, 3D model
- Title Translation: 弟子浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The elderly disciple Kasyapa, together with the youthful Ananda, represent the Buddha's initial monastic followers.
534 - 550
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head was quite deeply cut from the torso of the central Buddha on the north wall, which still remains in Cave 17.
618 - 907
Bodhisattva Torso, 3D model
- Title Translation: 菩萨身 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head has been reattached to the neck and chest and does not appear to fit perfectly. Therefore people have expressed doubt that they are from the same figure originally.
618 - 907
Bodhisattva Relief, 3D model
- Title Translation: 菩萨浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva seated in contemplation under a tree represents the awakening of the youthful Prince Sakyamuni's awareness of the suffering of life.
534 - 550
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The figure once stood on the north wall of Cave 14 beside the seated Buddha. Its head is now in the Barnes Foundation.
618 - 907
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The photograph of this fine head of a bodhisattva on the west wall of Cave 14 in the early 1920s shows that it was missing the topknot and nose which have not been repaired.
618 - 907
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva head is from a standing figure on the east wall of Cave 8.
581 - 618
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from a seated bodhisattva figure from the back wall of Cave 21 that was formerly in the Idemitsu Museum, Tokyo, and is now in the National Museum of China.
618 - 907
Pratyekabuddha Head, 3D model
- Title Translation: 辟支佛(缘觉)头 , 3D模型
- Period: Northern Qi, c. 580 C.E.
- Project: Xiangtangshan Caves
580
Monster Squatting Caryatid, 3D model
- Title Translation: 鬼神蹲女像柱 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Disciple Head, 3D model
- Title Translation: 弟子头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Monster Kneeling, 3D model
- Title Translation: 跪鬼神 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Musician Panpipes, 3D model
- Title Translation: 排箫乐伎 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Apsaras Head, 3D model
- Title Translation: 飞天头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Although the Northern Qi was a shortlived state in northeastern China, it once served as a major center for the development of Buddhism. Its rulers were fervent followers of Buddhism and patrons of innumerable temple building projects. A major focus of their efforts was the great rock-cut cave complex at Xiangtangshan on the border between Hebei and Henan. This head once belonged to a colossal statue at this site. Its rounded, rather youthful face and smooth contours are typical of the stylistic development of the time.
550 - 577
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Sui, 581-518 C.E.
- Project: Xiangtangshan Caves
- Work Description: Bodhisattva in standing position, head and hands turned away. Draped in a tightly enveloping dhoti and a long shawl, falling over the shoulders and arm, thin ornamental folds.
550 - 577
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Carved out of one piece of stone, this bodhisattva stands barefooted on a base and wears a long gown, ornate jewelry, and a large rosette-shaped crown. The rounded, solid form and the solemn facial expression convey the deity's grace and compassion, and mark an artistic departure from the foreign influence of India and Central Asia toward a new, distinguished Chinese style. This statue comes from Xiangtangshan (Mountains of Resounding Halls), a Buddhist cave complex built on a hillside near Handan in Hebei province, and is one of the earliest Buddhist statues built in this complex. Its construction was funded by Emperor Gao Yang of the Northern Qi dynasty.
550 - 577