CENTER FOR THE ART OF EAST ASIA
DIGITAL COLLECTIONS
List Gallery

Showing  101 - 125 of 198 Records

Relevance Title (A-Z) Title (Z-A) Date (Ascending) Date (Descending)
25 50 100
Showing  101 - 125 of 198 Records
  Map Filter   Date Filter

198 model
Stela, 3D model
  • Title Translation: 石碑 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Tall thin stela slightly rounded at the top in a dark limestone which has been weathered a golden brown. Both the obverse and reverse are in three registers with niches containing Buddhas and bodhisattvas. The inscription on the obverse gives the date as, "6th year of the Wuping period of the [Northern] Qi Dynasty, fourth moon, eighth day", which corresponds to May 3, 575 CE. The obverse shows Tushita Heaven at the top with Maitreya flanked by monks and bodhisattvas, and Sakyamuni and Prabuhtaratna Buddha in a small stupa above. The scene in the middle depicts a Buddha and a crowned bodhisattva with monks and bodhisattvas on either side. Between them stands a Buddha. Below this is a crowned bodhisattva underneath two trees flanked by monks, bodhisattvas, and pratyekabuddhas. The reverse side depicts Sukhavati, Amitabha Buddha's paradise, at the top, with reborn souls appearing in the foliage above the Buddha. In the center, Vimalakirti, a Buddhist layman, holds a fan as he debates with Manjusri, the Bodhisattva of Wisdom amid a group of seated monks. Below this is a scene from the Lotus Sutra showing Prabhutaratna and Sakyamuni Buddhas preaching together side by side. The sides of the stela show eight Buddhas, a standing Maitreya (with crown) and standing Sakyamuni Buddha with six Buddhas of the Past beneath them (three on each side). This stela probably came from the Xiangtangshan caves in Hebei province.
550 - 577

Buddha Hand, 3D model
  • Title Translation: 佛手 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head is from the seated bodhisattva formerly in Cave 17 on the east wall, north side. The body is now in the Nelson Atkins Museums of Art.
618 - 907

Flying Divinity, 3D model
  • Title Translation: 飞天 , 3D 模型
  • Period: Eastern Wei, 534-550 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The heavenly divinity carved in relief is holding a bowl in the gesture of offering.
534 - 550

Flying Divinity, 3D model
  • Title Translation: 飞天 , 3D 模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The heavenly musician from the ceiling of Cave 16 plays a pipa or lute-like instrument.
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head is from the seated bodhisattva on the east wall of Cave 17 at the proper left side of the Maitreya Buddha.
618 - 907

Guardian Standing, 3D model
  • Title Translation: 天王、护法力士立像 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The muscular body and fierce expression of this door guardian from Cave 17 create a vivid impression of strength.
618 - 907

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D 模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The large head is from the niche on the west wall of Cave 1.
550 - 577

Buddha Seated, 3D model
  • Title Translation: 坐佛 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The Buddha sits in meditation with his right hand extended downward in the gesture of bhumispara (earth touching).
618 - 907

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head is from the seated bodhisattva on the north wall, west side, Cave 18, as recorded in historical photographs. The topknot and nose are restored.
618 - 907

Bodhisattva Standing, 3D model
  • Title Translation: 立菩萨 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: This standing bodhisattva is unusually well-preserved and can be identified with a figure on the north wall in historic photographs of Cave 18.
618 - 907

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Sui, 581-618 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head is from one of the standing bodhisattvas on the west wall of Cave 8.
581 - 618

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The bodhisattva head wearing elaborate crown is possibly from Cave 16.
550 - 577

Cave 10
  • Title Translation: 第十窟 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: Cave 10 is a Northern Qi cave that is just west of the colossal sculptures and wooden structure of Cave 9. It is accessible through an opening in the east wall adjacent to Cave 9. The entrance porch is now high above path in front of the cave. Still partially preserved on the west side, it has one large pillar remaining on the west side. The entrance porch has two guardian figures standing outside, one of which mostly remains. Like the other caves of the Northern Qi period at Tianlongshan, this is one of the larger caves, its interior a square chamber more than three meters on each side with figures carved on four walls. There are recessed niches on the back and side walls that contain most of the principle sculptural images. Smaller figures of musicians and lions appear along the front of the low altar.
550 - 577

Flying Divinity, 3D model
  • Title Translation: 飞天 , 3D 模型
  • Period: Eastern Wei, 534-550 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The flying divinity or apsaras holds an alms bowl over its head.
534 - 550

Pratyekabuddha Standing, 3D model
  • Title Translation: 立缘觉佛 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Bodhisattva Standing, 3D model
  • Title Translation: 菩萨立像 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Both the Eastern Wei (535–50) and the Northern Qi dynasties were ruled from a capital at Ye (presentday Linzhang) in southern Hebei province; both sponsored the construction of new cave temples. The complex built at Xiangtangshan (not far from the capital) dates from the Northern Qi period. It consists of two sites: the three enormous cave temples at the top of the mountain are known as Northern Xiangtangshan, while an additional seven smaller shrines, about nine miles to the south, are known as Southern Xiangtangshan. This head comes from the southern site, which was constructed slightly later.
550 - 577

Bodhisattva Hand, 3D model
  • Title Translation: 菩萨手 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Monk Kneeling, 3D model
  • Title Translation: 跪僧侣 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: The North Xiangtangshan Grottoes are located in the Fengfeng mining district of Handan city, Hebei province. These caves are major Northern Qi dynasty caves that are thought to have been commissioned by imperial order. The South Cave of the grottoes was begun in 568, and the main surface and its two flanking walls are carved with large niches. This image is one of a pair of seated Buddhist priest figures carved in relief on either side of a large censer in the platform area of one of the side walls. The figure hunches over, with its mouth tightly closed as it holds something with both hands, exuding a particularly tranquil demeanor.
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and yellow pigment. This head would have originally been part of a colossal statue. The piece is a companion to C353 and very similar to it, the principal differences being that the hair is arranged in a number of plaits and the crown is more elaborate. It is believed to originally come from the North Cave of Northern Xiangtangshan.
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and light green pigment. This head would have originally been part of a colossal statue. The urna, represented by a round socket, would have originally contained some kind of precious stone or crystal sphere. The hair is smooth and parted in the middle. The crown has three peaks with a fillet around the base of the ushnisha. C353 and C354 are a pair from the North Cave of Northern Xiangtangshan.
550 - 577

Bodhisattva Hand, 3D model
  • Title Translation: 菩萨手 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Bodhisattva Hand, 3D model
  • Title Translation: 菩萨手 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577