Showing
326 - 350 of 975 Records
Cave 21
- Title Translation: 第二十一窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 21 is the largest Tang dynasty cave with the exception of Cave 9. It now has traces of only a single larger than life-sized seated Buddha on the north (back) wall and five standing attendants (Photograph. Li 2003, color pl. 21). The cave is damaged by a large fissure in the stone that cuts across the east and west walls, thus the stone may not have been suitable for sculpting. It is possible that some of the figures formerly made for the cave were not attached to the walls, but carved separately and placed into the cave.
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, Northern Qi, Sui, Tang, 534-907 C.E.
- Project: Tianlongshan Caves
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, Northern Qi, Sui, Tang, 534-907 C.E.
- Project: Tianlongshan Caves
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the standing bodhisattva figure on the east wall of Cave 14.
Guardian Head, 3D model
- Title Translation: 天王、护法力士头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This is the original head of the muscular guardian figure in the Nelson-Atkins Museum of Art that once stood in the porch of Cave 17.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The flying divinity playing a drum is not known to be from any existing Tianlongshan cave.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva, one of a pair of standing bodhisattvas from Cave 4, holds a loop of his long trailing scarf in one hand.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The flying figure is very similar to apsarases from Caves 2 and 3, but it cannot be attributed to any known cave.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva head from the east wall of Cave 10 wears a crown with floral panels and jeweled tassels.
Finial Phoenix, 3D model
- Title Translation: 凤凰 , 3D 模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: The finely carved piece is part of a phoenix that once stood on top of a column beside the entrance of Cave 8.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: This small head resembles Buddha heads in historic photographs of Cave 3. It is missing the usnisa at the top of the head.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the Buddha on the east wall of Cave 1.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva standing in a pose of reverence is from the west wall of Cave 17. The head is not original.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This standing bodhisattva is from the west wall of Cave 14. Its head is now in the Tokyo National Museum.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The source of this head was probably a smaller cave at Tianlongshan.
Buddha Seated, 3D model
- Title Translation: 坐佛 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The Buddha seated with feet resting on small supports at the base of the throne is probably Maitreya, Buddha of the future age.
Buddha Hand, 3D model
- Title Translation: 佛手 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The large hand, now missing the upper joints of the fingers, may have originated from a Buddha image in Cave 16.
Cave 3
- Title Translation: 第三窟 , 3D模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: Like Cave 2, Cave 3 has a square plan with Buddha and bodhisattva images with relief carvings on three walls.
Cave 16
- Title Translation: 第十六窟 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 16 is the most important Northern Qi cave at the Tianlongshan site. The porch still has elements of post and lintel construction and bracketing supporting the overhanging eave that derive from construction in wood. The interior had fine sculptures that partially remain. The cave is now inaccessible from the path, which may account for its relatively good state of preservation. Cave 17 is a relatively small Tang cave that had numerous fine sculptural images. On the interior there were three seated Buddhas, two standing bodhisattvas, and six seated bodhisattvas around three walls. Many figures and fragments from Cave 17 are known to be in museums outside China.
Bodhisattva Relief, 3D model
- Title Translation: 菩萨浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva holds his hands together in anjalimudra, a gesture of reverence.
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, 534-907 C.E.
- Project: Tianlongshan Caves
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, 534-907 C.E.
- Project: Tianlongshan Caves
Guardian Head
- Title Translation: 天王、护法力士头
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The head with frowning expression comes from a guardian figure on the south wall of Cave 10 in Tianlongshan.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from a bodhisattva on the north (back) wall, west side of the Buddha. The standing figure from which it comes is now in the Rietberg Museum, Zurich.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The stone is reddish in color and the carving not typical of known examples from Tianlongshan.