Showing
326 - 350 of 416 Records
Seated Buddha and Bodhisattvas
- Title Translation: 三佛龛
- Period: Tang, 703 C.E.
- Project: Guangzhai Temple Qibaotai Pagoda
- Work Description: This work is one of the thirty-two existing examples from the statue group in Baoqingsi Temple, Xi’an, Shaanxi, China. It was distinctively expressed in early Tang style which absorbed the Indian influence. The middle statue was presented with hands and fingers in the position of Sokuchi’in mudra. This pose is related to the statue of Śākyamuni in Budh Gaya in India where he had completed self-discipline and enlightened to the truth.
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Both the Eastern Wei (535–50) and the Northern Qi dynasties were ruled from a capital at Ye (presentday Linzhang) in southern Hebei province; both sponsored the construction of new cave temples. The complex built at Xiangtangshan (not far from the capital) dates from the Northern Qi period. It consists of two sites: the three enormous cave temples at the top of the mountain are known as Northern Xiangtangshan, while an additional seven smaller shrines, about nine miles to the south, are known as Southern Xiangtangshan. This head comes from the southern site, which was constructed slightly later.
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and yellow pigment. This head would have originally been part of a colossal statue. The piece is a companion to C353 and very similar to it, the principal differences being that the hair is arranged in a number of plaits and the crown is more elaborate. It is believed to originally come from the North Cave of Northern Xiangtangshan.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and light green pigment. This head would have originally been part of a colossal statue. The urna, represented by a round socket, would have originally contained some kind of precious stone or crystal sphere. The hair is smooth and parted in the middle. The crown has three peaks with a fillet around the base of the ushnisha. C353 and C354 are a pair from the North Cave of Northern Xiangtangshan.
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Standing Guanyin
- Title Translation: 观世音菩萨
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Statue of a standing bodhisattva made of dark stone, brown and stained with age, with traces of red, green and blue pigment. The bodhisattva has a long face, plump cheeks, eyes nearly closed, with very long lobed ears, unpierced. There is a jeweled tiara with small a aureole in front on which is carved a tiny standing figure of Amida Buddha. There are streamers from the headdress with elaborately draped scarfs and jewels hanging down over the skirt. The statue is bare foot with no pedestal but does have a tang that comes out the bottom of the piece. C113, C150 and C151 are a set and come from Cave #2 of the Southern Xiangtangshan cave complex.
Northern Xiangtangshan, Middle Cave, façade
- Title Translation: 北响堂山中洞 , 外墙
- Period: Northern Qi, Ming, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: The Middle Cave, the second largest of the caves in scale, still has its impressive entrance and large stone porch largely preserved. In recent times, a wooden porch-like structure was added to the front of the cave. Above the eaves of the porch and carved into the stone mountainside, there is a domed roof with a fenced harmika or platform at the top. The single-story stupa with domed roof is a distinctive feature of the design of the Xiangtangshan caves and appears on the walls of the North Cave and on many smaller stone carvings of the middle and late sixth century. Tall armored guardian figures stand under the stone eaves of the porch, and large lions support the columns flanking the door. Walking into the cave, visitors pass under the gaze of two tall bodhisattvas who face the entrance. The Middle Cave, like the great North Cave, has a large central pillar. However, it has only a single large niche deeply cut into the front of the pillar to form an altar on which a Buddha sits on a lotus throne accompanied by two tall standing disciple figures and two bodhisattvas. The base of the central pillar has relief figures of Spirit Kings, lions, and incense burners, much like the North Cave. The cave walls were originally left largely plain, but devotees of the Ming dynasty (1368-1644) added a row of seated Buddhas contained in shallow niches that encircle cave's interior.
Bodhisattva Standing
- Title Translation: 立菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This standing bodhisattva is unusually well-preserved and can be identified with a figure on the north wall in historic photographs of Cave 18.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva on the north wall, west side, Cave 18, as recorded in historical photographs. The topknot and nose are restored.
Bodhisattva Standing
- Title Translation: 立菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This standing bodhisattva is from the west wall of Cave 14. Its head is now in the Tokyo National Museum.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The crowned bodhisattva head, believed to be from Cave 1, is partially covered with brown pigment and shows signs of damage and restoration.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva head from the east wall of Cave 10 wears a crown with floral panels and jeweled tassels.
Bodhisattva Relief
- Title Translation: 菩萨浮雕
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva Manjusri was located on the east wall of Cave 2 near the front of the cave, opposite a relief figure of Vimalakirti.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: unknown, unknown
- Project: Tianlongshan Caves
- Work Description: The head is carved of a finer textured stone and appears to be later in style of carving than those from existing sixth-eighth century caves at Tianlongshan.
Bodhisattva Standing
- Title Translation: 立菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva stands with right hand raised holding something with the thumb and forefinger.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This head, whose current location is unknown, is believed to be the original head of the standing bodhisattva in the Asian Art Museum, San Francisco.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The large head is from the cross-ankled Maitreya bodhisattva image in the east wall niche of Cave 10.
Bodhisattva Seated, 3D model
- Title Translation: 坐菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The unusually well-preserved bodhisattva figure seated in royal ease has one hand raised, holding a jewel.
Longmen Binyang Central Cave, south wall bodhisattvas
- Title Translation: 龙门宾阳中洞 , 南壁菩萨
- Period: Northern Wei, 386–534 C.E.
- Project: Longmen Binyang Central Cave
- Work Description: The Longmen Caves are located outside the city of Luoyang, China, about 500 miles southeast of the modern-day capital in Beijing. Established in the late fifth century, the site consists of 2,345 caves, and over 100,000 individual Buddhist statues, ranging in height from a few inches to over 56 feet. For more than 250 years, Chinese Buddhists from all walks of life sponsored the addition of Buddhist statues and inscriptions to the site, most significantly from the late Northern Wei (386-534) through the Tang dynasty (618-907). Binyang Central Cave is one of the earliest at Longmen and a major monument of Chinese Buddhism. Begun around the year 501, it was commissioned by the youthful Emperor Xuanwu (483-515) and dedicated to his father, Emperor Xiaowen, who died in 499 at age thirty-three. The cave is one of the major monuments of Chinese Buddhism. MEasuring roughly 30 feet in each dimension, its principal image is 28-foot-high seated Buddha largly filling the back of the cave and accompanied by smaller standing figures—disciples, Buddhas, and bodhisattva—on either side. The exit wall contained some of the finest stone relief carvings of the era, including depictions of two imperial processions, and a number of stories from Buddhist scriptures. After cave-making was discontinued for nearly a thousand years, the Longmen site was "discovered" by foreign scholars in the late 1800s. The publication of their studies with photos attracted international attention to the artistic quality of the sculptures. The publications ultimately led to the looting of much of the site in the early part of the twentieth century. In response to demand from art dealers, collectors, and museums around the globe, local stonecutters removed countless works from the caves, often breaking them into numerous fragments in the process. Pieces from the greater Longmen complex can now be found scattered throughout the world. In Binyang Central Cave, several heads and large portions of the relief carvings were cut or burned out of the walls. Fragments from Binyang Central Cave now reside in museums in the US and Japan, as well as in storage at the Longmen Research Institute in China. Many shattered pieces are identifiable today with the evidence of historical photographs and rubbings taken of the reliefs before their removal.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The figure is likely to be from one of the smaller caves at Tianlongshan where it stood as an attendant to the Buddha with hands held together in reverence.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The figure is likely to be from one of the smaller caves at Tianlongshan where it stood as an attendant to the Buddha with hands held together in reverence.