Showing
576 - 600 of 975 Records
Cave 2
- Title Translation: 第二窟
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 2 and 3, the paired caves, are believed to be from the Eastern Wei period and are the earliest caves at Tianlongshan. They are located on the eastern side of the Tianlongshan caves site and below the upper level caves. Cave 2 is on the right. The caves are distinctive for the many relief carvings on the walls and ceiling, most of which have been removed.
Cave 6
- Title Translation: 第六窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 6 is a small square cave of the Tang period that had nine sculpted images on the interior, with a central seated Buddha on the back and side walls accompanied by bodhisattvas and disciples. On the exterior the traces of two guardian figures appear at the sides of the entrance. The exterior still has a small porch in front.
Cave 14
- Title Translation: 第十四窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 14 is a Tang cave that had finely carved sculptures, many of which are now in collections outside China
Cave 16
- Title Translation: 第十六窟
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 16 is the most important Northern Qi cave at the Tianlongshan site. The porch still has elements of post and lintel construction and bracketing supporting the overhanging eave that derive from construction in wood. The interior had fine sculptures that partially remain. The cave is now inaccessible from the path, which may account for its relatively good state of preservation.
Cave 16
- Title Translation: 第十六窟
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 16 is the most important Northern Qi cave at the Tianlongshan site. The porch still has elements of post and lintel construction and bracketing supporting the overhanging eave that derive from construction in wood. The interior had fine sculptures that partially remain. The cave is now inaccessible from the path, which may account for its relatively good state of preservation.
Cave 21
- Title Translation: 第二十一窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 21 is the largest Tang dynasty cave with the exception of Cave 9. It now has traces of only a single larger than life-sized seated Buddha on the north (back) wall and five standing attendants (Photograph. Li 2003, color pl. 21). The cave is damaged by a large fissure in the stone that cuts across the east and west walls, thus the stone may not have been suitable for sculpting. It is possible that some of the figures formerly made for the cave were not attached to the walls, but carved separately and placed into the cave.
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, Northern Qi, Sui, Tang, 534-907 C.E.
- Project: Tianlongshan Caves
Buddha Head
- Title Translation: 佛头
- Period: Eastern Wei, Northern Qi, Sui, Tang, 534-907 C.E.
- Project: Tianlongshan Caves
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head has been attributed to Cave 18.
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Bodhisattva head likely to be from Buddha niche on east wall of Cave 16.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva formerly in Cave 17 on the east wall, north side. The body is now in the Nelson Atkins Museums of Art.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The head has unusual features and does not appear to have been cut from a cave wall and therefore its attribution to Tianlongshan is questionable.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The heavenly divinity carved in relief is holding a bowl in the gesture of offering.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The heavenly musician from the ceiling of Cave 16 plays a pipa or lute-like instrument.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The flying divinity carving is not known to be from any existing cave at Tianlongshan.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The flying divinity is attributed to Tianlongshan, but it is not known to be from any existing cave at the site.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: Because the Buddha head appears to be carved of limestone with the upper portion restored, it cannot be identified with any of the Tianlongshan caves.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva on the east wall of Cave 17 at the proper left side of the Maitreya Buddha.
Guardian Standing, 3D model
- Title Translation: 天王、护法力士立像 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The muscular body and fierce expression of this door guardian from Cave 17 create a vivid impression of strength.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The large head is from the niche on the west wall of Cave 1.
Buddha Seated, 3D model
- Title Translation: 坐佛 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The Buddha sits in meditation with his right hand extended downward in the gesture of bhumispara (earth touching).
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva on the north wall, west side, Cave 18, as recorded in historical photographs. The topknot and nose are restored.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from one of the standing bodhisattvas on the west wall of Cave 8.
Cave 10
- Title Translation: 第十窟 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 10 is a Northern Qi cave that is just west of the colossal sculptures and wooden structure of Cave 9. It is accessible through an opening in the east wall adjacent to Cave 9. The entrance porch is now high above path in front of the cave. Still partially preserved on the west side, it has one large pillar remaining on the west side. The entrance porch has two guardian figures standing outside, one of which mostly remains. Like the other caves of the Northern Qi period at Tianlongshan, this is one of the larger caves, its interior a square chamber more than three meters on each side with figures carved on four walls. There are recessed niches on the back and side walls that contain most of the principle sculptural images. Smaller figures of musicians and lions appear along the front of the low altar.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The flying divinity or apsaras holds an alms bowl over its head.