Showing
176 - 200 of 221 Records
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: The small head is carved of a reddish sandstone and has not been identified with any cave at Tianlongshan.
Finial Bird, 3D model
- Title Translation: 瑞鸟 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: This bird and its mate came from the north wall of Cave 16 where they flanked the main group of Buddhist figures in the niche.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The standing bodhisattva is believed to be from the east wall, north side, Cave 18.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This finely carved head is from a standing bodhisattva on the west wall of Cave 14. The figure to which it belongs is in the Museum Rietberg.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated Buddha on the west wall of Cave 18.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head of the bodhisattva is missing its topknot. Other heads from Cave 18 have had the topknot restored.
Cave 1
- Title Translation: 第一窟 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 1 is located at the far eastern end of the Tianlongshan caves site more than thirty meters from the the next cave, Cave 2. It is one of the larger caves, believed to be of the Northern Qi period. The facade still has part of the eave over the entrance porch showing architectural elements of posts and brackets and tiled roof carved in stone. The porch is about 3.5 meters wide and has an old stele carved on the right side. There was a dedicatory inscription carved on it, but only a few characters are now legible. The interior is a square chamber with niches on the back and side walls, each formerly containing a seated Buddha and two bodhisattvas.
Cave 17
- Title Translation: 第十七窟 , 3D模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 17 is a relatively small Tang cave that had numerous fine sculptural images. On the interior there were three seated Buddhas, two standing bodhisattvas, and six seated bodhisattvas around three walls. Many figures and fragments from Cave 17 are known to be in museums outside China.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The flying divinity hovering above clouds is one of four such figures carved in relief on the ceiling of Cave 3.
Disciple Relief, 3D model
- Title Translation: 弟子浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The elderly disciple Kasyapa holds an incense burner in his hands.
Devotee Relief, 3D model
- Title Translation: 信徒浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: Relief carvings of Buddhist worshipers appeared on the lower level of the walls of Caves 2 and 3.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The snail shell curls of the hair are unusual on Tang dynasty Buddhas at Tianlongshan. The specific cave from which it comes is uncertain.
Buddha, 3D model
- Title Translation: 菩萨 , 3D 模型
- Period: Tang dynasty, 725 – 750 C.E.
- Project: Dispersed Buddhist Sculptures
- Work Description: In eighth-century China, Buddhist sculptors adopted new standards of secular beauty for spiritual figures. Whereas images of the Buddha appear sternly formal, bodhisattvas, the merciful deities that guide men toward salvation, often display more humanistic features. This bodhisattva’s graceful proportions, upswept hair, sinuous drapery, and delicate jewelry convey an appealing physical elegance. Seated informally, the deity is poised to step down from its pedestal. Together with a large seated Buddha and another attendant bodhisattva in the Art Institute collection (1930.83, 1930.84), this sculpture came to the museum in 1930 with a note of its discovery in a temple known as Cangfosi in northern Hebei province. Neither archaeological nor written records have been located to confirm this reported site. The scale and stone medium of these figures suggest that they were commissioned for a cave temple or shrine a chamber carved into the face of a mountain or cliff. Source: Art Institute of Chicago, CC0 (https://www.artic.edu/artworks/9613/head-of-guanyin)
Pratyekabuddha Standing, 3D model
- Title Translation: 立缘觉佛 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Buddha Head, 3D model
- Title Translation: 佛头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Both the Eastern Wei (535–50) and the Northern Qi dynasties were ruled from a capital at Ye (presentday Linzhang) in southern Hebei province; both sponsored the construction of new cave temples. The complex built at Xiangtangshan (not far from the capital) dates from the Northern Qi period. It consists of two sites: the three enormous cave temples at the top of the mountain are known as Northern Xiangtangshan, while an additional seven smaller shrines, about nine miles to the south, are known as Southern Xiangtangshan. This head comes from the southern site, which was constructed slightly later.
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Monk Kneeling, 3D model
- Title Translation: 跪僧侣 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: The North Xiangtangshan Grottoes are located in the Fengfeng mining district of Handan city, Hebei province. These caves are major Northern Qi dynasty caves that are thought to have been commissioned by imperial order. The South Cave of the grottoes was begun in 568, and the main surface and its two flanking walls are carved with large niches. This image is one of a pair of seated Buddhist priest figures carved in relief on either side of a large censer in the platform area of one of the side walls. The figure hunches over, with its mouth tightly closed as it holds something with both hands, exuding a particularly tranquil demeanor.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and yellow pigment. This head would have originally been part of a colossal statue. The piece is a companion to C353 and very similar to it, the principal differences being that the hair is arranged in a number of plaits and the crown is more elaborate. It is believed to originally come from the North Cave of Northern Xiangtangshan.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and light green pigment. This head would have originally been part of a colossal statue. The urna, represented by a round socket, would have originally contained some kind of precious stone or crystal sphere. The hair is smooth and parted in the middle. The crown has three peaks with a fillet around the base of the ushnisha. C353 and C354 are a pair from the North Cave of Northern Xiangtangshan.
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Buddha Head, 3D model
- Title Translation: 佛头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
Buddha Head, 3D model
- Title Translation: 佛头 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves